Directions

1. Turn off the ice machine and remove all ice from the storage bin.

Directions

2. Remove the drain cap from the bottom of the water pan located at the rear of the ice storage bin. Allow the water to drain completely.

Directions

3. Replace the drain cap on the water pan.

Directions

4. Pour the entire contents of the ice machine cleaner bottle in the water pan.

Directions

5. Add 32 oz. of tap water into the water pan

(To measure using bottle, fill twice)

Directions

6. Activate the "Clean Cycle". During the cycle, the system will clean and rinse itself.

Directions

7. After the cleaning cycle is complete, remove the drain cap. If any cleaning solution is visible, replace the drain cap and repeat step 5 to further rinse.

Directions

8. Turn on the ice machine to resume ice production