The Alpha Medical Three Panel Knee Immobilizer has a unique design that maximizes comfort and effectiveness. There is a large back panel made from 1/4" thick foam that has three ridged preformed stays that run down the back of the leg. The stays are bent to resemble the anatomical shape of the back of the leg and knee. There are two side panels (one on each side) that attach with Velcro to the back panel. These side panels can be moved to make the immobilizer larger or smaller while keeping the side stays correctly positioned on the medial and lateral sides of the knee. There are four Velcro straps, which feed through plastic loops for even adjustable compression. The open patella design removes direct pressure from the patella for improved comfort while also helping to stabilize the patella. Knee Immobilizers are used to treat knee injuries, with a focus on the ligaments of the knee or other severe injuries to the soft tissue of the leg.

Length Guide: When considering what size is best for you keep in mind that your knee cap will be in the center of the brace. (For example if you order a 16" length you would have 8" above your knee cap and 8" below your knee cap)

Item is available in the following lengths:

12"

16"

18"

20"

22"

Application & Fitting Instructions:

Open the knee immobilizer and lay flat. Locate the side panels and pull them apart with the Velcro attachment. Reattach the side panels farther away from the center of the back panel to make the brace larger or closer to the center if the back panel to make it smaller. After reattaching the side panels check the fit. If necessary readjust. Wrap the immobilizer around the knee thread the straps through the buckles. Velcro closed.

Care Instructions:

Close all fasteners. Machine or hand wash with mild detergent. Dry flat. Do not use dryer or iron.