Artego It'sColor 150 ml. Permanent Hair Dye
Shiny and resistant to bleeding
Fixed and clear results, shiny hair
Long-lasting
124color options
Low ammonia level
Mineral oil and amphoric molecule composition
Reflective color transition system
Beeswax, B1, B2 vitamin content
100 white coverage (With oxidant specific to paint)
1 1 usage ratio
Oxidant Selection
Oxidant is a creamy liquid that activates the dye.
One of the most important elements of hair coloring is choosing the right oxidant.
Choosing an oxidant that is not suitable for the process you will be performing may lead to undesirable results.
For this reason, you should choose your oxidant as carefully and meticulously as you choose your dye. Be sure to use the same brand of oxidant as the dye you choose.
You can easily select the oxidant that is suitable for the process you will apply from the table below.
20Vol.Oksidant: For covering gray hair, lightening 1-2 tones and dyeing the hair to the same tone,
30Vol.Oksidant: For lightening the hair up to 2-3 tones,
40Vol.Oksidant: It should be preferred for lightening the hair 3-4 tones and for highlights and balayage applications.
Mixture
Use a non-metallic mixing bowl and mixer to prepare the mixture.
Select the appropriate oxidant for the process you will be applying.
Mix 1 tube of paint with the same amount of oxidant cream.
For example, use 50ml of oxidant for 50ml of paint.
Mix the paint and oxidant until you get a smooth texture.
Application
Root Dyeing Apply the mixture evenly to the roots of unwashed, dry hair.
Leave on for 35 minutes.
Rinse the hair with plenty of warm water until the water runs clear.
Wash and rinse with color protection shampoo.
White Cover
If the white ratio is up to 50 , mix the desired color with the same ratio of oxidant.
In order to cover the gray hair that covers more than 50 of the hair, you should also get help from the main color tone
Mix the same ratio of the main color with the same ratio of the oxidant as the dye you choose.
If you mix 50ml of dye with 50ml of base color, you should add 100ml of oxidant in total.
Apply the dye to unwashed, dry hair.
Start applying the dye from the front and finish at the sides.
After waiting for 20 minutes, you can make a second application to the areas where the whites are intense.
After waiting for a total of 35 minutes, rinse your hair with plenty of warm water until the water runs clear.
Then wash and rinse with color protection shampoo.
Dyeing Natural Hair
Start by applying the dye to the lengths and ends of unwashed and dry hair. After waiting for 20-25 minutes, apply the dye to the roots of your hair and wait for another 30-35 minutes. Before washing your hair, massage to mix the dye on the roots and lengths of your hair. Rinse your hair with plenty of warm water until clean water runs clear. Wash and rinse with color protection shampoo.
Color Change
Start applying the dye to the roots of unwashed and dry hair. After waiting for 25-30 minutes, continue the application to the lengths and ends of the hair. After waiting for another 5-10 minutes, rinse your hair with plenty of warm water until the water runs clear. Wash and rinse with color protection shampoo.
Warnings
The information leaflet inside the box should be taken into consideration for paint mixtures and applications.
The mixture amount and application methods written on the site are recommendations.
Mixing ratio, application method and waiting time may vary depending on the application and the dye to be used.
The dye you have purchased is prepared for professional use. There is only 1 tube of dye in the box. You need to purchase the oxidant you need to prepare the mixture separately.
Professional dyes are designed only for dyeing hair. They are not suitable for other uses such as eyelashes, eyebrows, beards and mustaches.
Prefer non-metallic products to prepare and apply the mixture.
Do not use metal accessories (clips, hairpins, pliers, combs, etc.) during dyeing.
Apply all dyeing processes to unwashed, dry hair.
Use disposable protective gloves and a protective apron to prevent the dye from spreading during application.
Do not exceed the recommended waiting time.
Hair color is directly affected by the duration of the dye remaining on the hair.
Dyes that remain on the hair for less than necessary will not produce the desired results, while dyes that remain on the hair for more than necessary will also produce negative results.
Hair dyes can cause allergic reactions. Be sure to do a sensitivity test to prevent such situations.
Apply the small amount of mixture you will prepare after cleaning and drying the area behind the ear or the inside of the elbow.
Observe for 48 hours. If an allergic reaction is observed, never apply the dye.
Do not apply to sensitive or irritated scalps or to scalps damaged as a result of pathological conditions (eczema, psoriasis, etc.).
