To condition, clean, disinfect and remove protein daily, complete these simple steps. This daily regimen is recommended by Bausch + Lomb for a healthy and comfortable contact lens wearing experience: 

Step 1: Place at least 3 drops of Biotrue® multi-purpose solution on each side of lens surface and gently rub for 20 seconds.

Step 2: Thoroughly rinse each side of the lens for 5 seconds with Biotrue multi-purpose solution.

Step 3: Place cleaned contact lenses in the lens case and fill with fresh Biotrue multi-purpose solution. Soak at least 4 hours. Remember to always use fresh solution - discard solution from lens case after each use.

Always follow your eye care professional's instructions. Based on your individual tear chemistry and lens-wearing schedule, your eye care professional may recommend additional products or procedures.

Storage: You may store your lenses up to a maximum of 30 days in the unopened lens case. If stored longer than 30 days between wear, you need to follow the cleaning and disinfecting steps prior to lens insertion.

Failure to discard solution from lens case after each use or use of water to care for your lenses may lead to contamination resulting in eye injury or potential loss of vision. See accompanying instructions for additional important safety information.

Do not use a heat disinfection regimen. If you are allergic to any ingredient in this product, do not use.

Precautions:

• Always discard solution from lens case after each use.
• Keep the bottle tightly closed when not in use.
• Store solution at room temperature.
• Use before expiration date printed on the carton and bottle.
• Discard any remaining solution 90 days after opening.
• Keep out of reach of children.

Do not use if imprinted neckband on the bottle is broken or missing.

Note: When used daily, this solution will be used up before 90 days.