Charites 5-Barrel Hair Crimper and Waver: Creates Effortless Crimps and Waves

Instruction

1. Make sure that your hair is dry before using the crimper iron.
2. Push the "Power" button for 2 seconds to turn on the crimper.
3. Choose a heat setting and wait for the heating barrels to preheat for about 60 seconds.
4. Section a bunch of hair, clamp it between the barrels and grip the cool tips for about 4 - 10 seconds.
5. Repeat to work through the length of hair.
6. Push the "Power" button for 2 seconds to turn off the crimper and then disconnect the appliance from the outlet.
7. Beware of the remaining heat after using the appliance.

Notes:

About Charites 5 barrel hair crimper and waver iron

1. Temperatures are shown in Celsius. (80? = 176?; 180? = 356?; 210? = 410?)
2. The time for preheating depends on heat settings and the ambient temperature.
3. Hold the Power button for 2 seconds to turn on the appliance, and then allow the barrels to preheat.

For Better Results

1. Keep hair dry for styling.
2. For the first use, please starts with the lowest heat setting and use it on a small section for testing purposes.
3. DO NOT clamp the same section of hair for over 12 seconds. 4 - 10 seconds are recommended.
4. You can use a short time to create loose results, but the results may not hold. Use hair spray to help hold the results.
5. Results for thin, soft hair may not last long. Use hair spray to help hold the results.

Safety Instructions

1. It is normal for the hair waver to emit a slight odor, especially during the first few minutes of initial use.
2. There may be smoke emitting while using, as the moisture in hair evaporates and helps to form waves.
3. Barrels stay hot even after use. DO NOT touch the barrels before they cool down.
4. The appliance MUST be disconnected from electric outlets after use.