EYEBROW DYING STEPS. 1. Preparation for eyebrow tinting. Use ELAN DETOX-MOUSSE to clean eyebrows and skin before dyeing eyebrows. Remove the foam using a cotton pad moistened with water.2. Creating eyebrow shape. Create the shape of your eyebrows using any product suitable for this purpose. 3. Preparation of the colorant mixture. Mix EYEBROW GEL DYE with 1 OXIDANT in a 1:1 ratio in a non-metallic container. IMPORTANT! The color of the dye may vary from light brown to black due to exposure of the product to air after the packaging is opened. This is normal for the dyes included in the composition and does not affect the result of eyebrow dyeing at all or the repeatability of this result when periodically using the same composition of dye mixtures. 4. Eyebrow tintingApply dye to the eyebrows according to the created shape. Application time is 5–15 minutes (depending on the desired result). After the application time has elapsed, wash off the paint using a cotton pad moistened with water or use ELAN DETOX-MOUSSE. If you are using foam, remove any remaining foam using a cotton pad moistened with water. IMPORTANT! If the dye moves outside the desired brow shape, remove excess dye with a cotton swab moistened with water or ELAN remover (NOCOLOR, Smart Skin COLOR REMOVER or Skin Color CREAM REMOVER) and prevent the dye from drying to the skin. 5. Completion of the eyebrow tinting procedure. To consolidate the result, apply ELAN COLOUR FIX liquid fixer to the eyebrows.