Are you worried about the privacy and safety of yourself or your family when you are in a hotel or in an unknown environment?

4-in-1 anti-spy signal camera detector

The anti-spy bug finder uses an improved ultra-sensitive chip. Hidden camera detector can not only detect hidden cameras, but also helps you detect GPS tracking devices/strong magnetic field signals/wireless signal sources, etc. It integrates 4 functions in one device: wireless signal detection/infrared light detection/GPS detection/flashlight, so you can find devices that violate your privacy anytime and anywhere.

WIFI Signal Detection: When the hidden camera detector detects suspicious WiFi devices near you in this mode, you will hear a "beep". Supports adjustable sensitivity from 1 to 6 levels. Higher values mean higher sensitivity. Infrared light scan function: Slide the infrared lens on the back of the camera viewfinder up and briefly press the mode button. The 3 infrared lights on the back light up. Use the red filter to scan every corner of the room. If you find a reflective point, this is the camera lens. I'm so glad you found it! Magnetic GPS detection: GPS tracker finder with this mode can be detected whether a GPS tracking device is installed in the vehicle. Press the mode button twice to turn on the green light. Move the GPS detector to the place you want to detect. As soon as a suspicious object is detected, an alarm sounds and a blue light turns on. Torch mode: This hidden camera detector comes with an LED flashlight. So if you discover a suspicious device, you can activate this mode to find it.

Super long standby time

The camera finder detector has a built-in rechargeable lithium battery that can be fully charged in 2 hours. Even after 25 hours of continuous use, it does not stop working.

How to use detectors:

1. Pull out the antenna, click the "Switch" button, press and hold it for 3 seconds to turn on the device, make settings and start detection.

2. Camera detector after determining the approximate location, switch to infrared scanning, slide the infrared window up, press the back cover of the device up, 4 infrared detection lights light up and check through the LED light. Move the detector up, down, left and right to scan the environment. If there is a flashing bright dot in front of you, it is a camera. When the camera is scanned, it emits an alarm.