1. Prep the nail

PREP 1. Gently push back and clean cuticles. 2. Use a 180 grit file on the surface of the natural nail

plate to eliminate shine. 3. Remove dust and oils using cleanser on a lint free wipe with Nail Cleanser or 90% alcohol.

2. Apply a Base Coat

4.Brush on a thin layer of IN.HYPE Base Coat for Builder Gel onto the entire nail surface, make sure to cover sidewalls.

5. Cure for 30 sec in LED lamp.

3. Apply Nail Form or Tips

The form should be snug under the free edge.

4. Build up the desired length.

Sculpt tips to desired length onto 1/3 of the nail just above the free edge.

2. Flesh cure for 10 seconds.

Apply the gel onto the entire surface

1.Brush a thin layer of Structure Gel onto the entire nail surface, make sure to cover sidewalls. DO NOT CURE.

2. Drop a bead of Structure Gel toward the center of the nail to create an apex. Flash cure for 10 seconds in LED lamp. Apply more gel for desired thickness and flash cure for 10 sec.

3. Repeat on all nails and cure for 1 minute in LED lamp.

Shape & Buff the nail

1. Remove the Nail Form and cleanse nails.

2. File, shape and buff with a 180 grit file. Cleanse nails to remove dust.

Apply Top Coat

Finish the nails by applying a color gel and IN.HYPE Top Coat curing 30 seconds in an LED lamp or 2 minutes in a UV lamp.

REMOVAL

1. Clip of file off extended nails

2. File off 3/4 of builder before soak.

OPTION 1: 3. Fully saturate the cotton with remover. Soak for 15 minutes.

OPTION 2:

3. Apply IN.HYPE Removal Gel on the nails and leave for 5 minutes.

For thicker nails, additional time may be needed.

4. Gently push product off with a pusher.