LOREAL Inoa Ammonia-Free Hair Dye No: 8.11 60ml
With a unique transmission technology based on oil (ODS oil transmission system), it enhances the effect of the coloring system and helps protect the protective layer of the hair strand.
OXIDANT SELECTION
Oxidant is a creamy liquid that activates the dye. One of the most important elements of hair dyeing is choosing the right oxidant. Choosing an oxidant that is not suitable for the process you will be performing may lead to undesirable results. For this reason, you should choose your oxidant as carefully and meticulously as you choose your dye. Be sure to use the same brand of oxidant as the dye you choose. You can easily choose the oxidant that is suitable for the process you will be performing from the table below.
To darken hair color,
For covering gray hair, lightening 1-2 tones and dyeing hair to the same tone,
It should be preferred to lighten hair up to 2-3 tones.
MIXING
Use a non-metallic mixing bowl and mixer to prepare the mixture.
Choose the oxidant that is suitable for the process you will be performing.
Mix 1 tube of dye with the same ratio of oxidant cream.
Use 60ml oxidant for 60ml dye.
Mix the dye and oxidant until a smooth texture is achieved.
APPLICATION
Root Dyeing
Apply the mixture evenly to unwashed, dry hair roots.
Leave on hair for 35 minutes.
Rinse hair with plenty of warm water until clear water runs clear.
Wash and rinse with color protection shampoo.
White Covering
If the white ratio is up to 70 , mix the desired color with the same ratio of oxidant.
To cover the grays that cover more than 70 of the hair, you should also get help from the main color tone.
Mix the same amount of main color with the same amount of oxidant as the dye you choose.
If you are mixing 30ml of dye with 30ml of main color, you should add 60ml of oxidant in total.
Apply the dye to unwashed, dry hair.
Start applying the dye from the front and end at the sides.
After waiting for a total of 35 minutes, rinse the hair with plenty of warm water until the water runs clear.
Then wash and rinse with color protection shampoo.
Dyeing and Changing Color of Natural Hair
Start by applying the dye to the roots of unwashed and dry hair
After applying the dye to the roots, apply the dye to the lengths and ends of the hair.
After waiting for 35 minutes, rinse the hair with plenty of warm water until the water runs clear.
Wash and rinse with color protection shampoo.