Matrix socolor beauty hair dye 90 ml provides perfect coverage for white hair.
Cera oil care complex smoothes the white flake layer, strengthens the structure of the hair and continues its care effect until the next dyeing.
Creates long-lasting, bright and vivid colors.
Oxidant selection oxidant is a creamy liquid that activates the dye.
One of the most important elements of hair dyeing is choosing the right oxidant.
Choosing an oxidant that is not suitable for the process you will be performing may produce undesirable results.
For this reason, you should choose your oxidant as carefully and meticulously as you choose your dye.
Be sure to use the same brand of oxidant as the dye you choose.
You can easily choose the oxidant that is suitable for the process you will be applying from the table below.
10 vol.
Oxidant: For hair color darkening processes, 20 vol.
Oxidant: For white coverage, 1-2 tone lightening and dyeing the hair to the same tone, 30 vol oxidant: Should be preferred to lighten the hair up to 2-3 tones.
Use a non-metallic mixing bowl and mixer to prepare the mixture.
Select the oxidant suitable for the process you will apply.
Mix 1 tube of dye with the same ratio of oxidant cream.
Use 90ml oxidant for 90ml dye.
Mix the dye and oxidant until you obtain a smooth texture.
Application Apply the root dyeing mixture equally to unwashed, dry hair roots.
Leave on for 35 minutes.
Rinse hair with plenty of warm water until clean water runs clear.
Wash and rinse with color protection shampoo.
If the white coverage ratio is up to 50 , mix the desired color with the same amount of oxidant.
To cover whites covering more than 50 of the hair, you should also get help from the main color tone.
Mix the main color with the same amount of oxidant as the dye you choose.
If you are mixing 50ml of dye with 50ml of main color, you should add 100ml of oxidant in total.
Apply the dye to unwashed, dry hair.
Start applying the dye from the front and end at the sides.
After waiting 20 minutes, you can apply the second application to the areas where the whites are dense.
After waiting for a total of 35 minutes, rinse the hair with warm and plenty of water until the water runs clear.
Then wash with color protection shampoo and rinse.
Dyeing and changing the color of natural hair, start applying the dye to the lengths and ends of unwashed and dry hair.
After waiting 15 minutes, apply the dye to the roots of the hair and wait for another 20 minutes.
Before washing the hair, massage the hair to mix the dye on the roots and lengths.
Rinse your hair with plenty of warm water until the water runs clear.
Wash and rinse with color protection shampoo.
Warnings The dye you purchased is prepared for professional use.
There is only 1 tube of dye in the box.
You need to purchase the oxidant you need to prepare the mixture separately.
Professional dyes are designed only for dyeing hair.
They are not suitable for different uses such as eyelashes, eyebrows, beards, mustaches.
Prefer non-metallic products to prepare and apply the mixture.
Do not use metal accessories (clips, hairpins, tweezers, combs, etc.) during dyeing.
Apply all dyeing processes to unwashed, dry hair.
Use disposable protective gloves and a protective apron to prevent the dye from spreading throughout the application.
Do not exceed the recommended waiting time.
Hair color is directly affected by the time the dye stays in the hair.
Dyes that remain in the hair for less than necessary will not give the desired results, and dyes that remain in the hair for longer than necessary will also have negative results.
Hair dyes can rarely cause allergic reactions.
To prevent such situations, be sure to do a sensitivity test.
Apply the small amount of mixture you will prepare after cleaning and drying the area behind the ear or inside the elbow.
Observe for 48 hours.
If an allergic reaction is observed, do not apply the dye.
Do not apply to sensitive and irritated scalps or to scalps damaged by pathological conditions (such as eczema, psoriasis).
