Organic hair dye organic hair dye minimizes the damage caused by dye to the hair with its ammonia and resorcinol-free structure.
Enriched with almond and fruit extracts to protect the hair structure.
Supported with vitamins E and C for more permanent color results.
Creates hair colors with natural brightness.
Offers creative and permanent alternatives with its wide color range.
In addition to perfect white coverage, it provides color lightening up to 4 tones.
The leaflet that comes with the box should be taken into consideration when mixing and applying dyes.
The amount of mixture and application methods written on the site are recommendations.
The mixing ratio, application method and waiting time may vary depending on the application to be made and the dye to be used.
Choosing an oxidant oxidant is a creamy liquid that activates the dye.
One of the most important elements of hair coloring is choosing the right oxidant.
Choosing an oxidant that is not suitable for the process you will be doing may cause undesirable results.
For this reason, you should choose your oxidant as carefully and meticulously as you choose your dye.
Be sure to use the same brand of oxidant as the dye you choose.
You can easily select the oxidant that is suitable for the process you will apply from the table below.
20 vol.
Oxidant: For covering gray hair, lightening 1-2 tones and dyeing the hair to the same tone, 30 vol. Oxidant: For lightening the hair up to 2-3 tones, 40 vol.
Oxidant: Should be preferred for lightening the hair 3-4 tones and for highlights and balayage applications.
Use a non-metallic mixing bowl and mixer to prepare the mixture.
Select the oxidant that is suitable for the process you will apply.
Use the same amount of oxidant for 1 tube of dye.
If you are going to use 60ml of dye, you need to add 60ml of oxidant.
Mix the dye and oxidant until you obtain a smooth texture.
Warnings: The dye you have purchased is prepared for professional use.
There is only 1 tube of dye in the box.
You need to purchase the oxidant you need to prepare the mixture separately.
Professional dyes are designed only for dyeing hair.
They are not suitable for different uses such as eyelashes, eyebrows, beards, mustaches.
Prefer non-metallic products to prepare and apply the mixture.
Do not use metal accessories (clips, hairpins, pliers, combs, etc.) during dyeing.
Apply all dyeing processes to unwashed, dry hair.
Use disposable protective gloves and a protective apron to prevent the dye from spreading around during application.
Do not exceed the recommended waiting time.
Hair color is directly affected by the time the dye stays in the hair.
Dyes that remain in the hair for less than necessary will not give the desired results, and dyes that remain in the hair for more than necessary will also have negative results.
Hair dyes can rarely cause allergic reactions.
Be sure to do a sensitivity test to prevent such situations.
Apply the small amount of mixture you will prepare after cleaning and drying behind the ear or inside of the elbow.
Observe for 48 hours.
If an allergic reaction is observed, never apply the dye.
Do not apply to sensitive and irritated scalps or to scalps damaged as a result of pathological conditions (eczema, psoriasis, etc.).
Application root dyeing white coverage For more than 70 white hair, support from the main color is required in addition to the color you have chosen.
The main color and the selected color are added to the mixture in the same ratio.
Mix 30ml of the main color and 30ml of the selected color with a total of 60ml of oxidant.
Apply the mixture evenly to the roots of unwashed, dry hair.
Wait for 20-30 minutes at 40-50 degrees.
After the hair cools down to room temperature, you can start washing.
Add some hot water to the dyed hair and lather it up, ensuring that the dye spreads evenly throughout the hair.
Massage especially the white parts for 3-5 minutes.
Wash and rinse the hair with a shampoo suitable for the hair type.
The waiting time can be increased or decreased in a controlled manner according to the hair type and the desired effect.
Dyeing and changing the color of natural hair Apply to all hair, leaving a distance of 2 cm from the roots of unwashed and dry hair.
After dyeing all of your hair, apply to your hair roots.
Leave it under heat for 15-20 minutes! After your hair cools down to room temperature, you can start washing it.
Add some hot water to your dyed hair and lather it up, ensuring the dye spreads evenly throughout your hair.
Wash with plenty of warm water and massage for 3-5 minutes until the water runs clear.
Wash and rinse your hair with a shampoo suitable for your hair type.
The waiting time can be increased or decreased in a controlled manner depending on your hair type and desired effect.
Number 11 dyes, which provide up to 4 tones of color lightening, are mixed with oxidant at a ratio of 1 to 2.
You need to mix 120ml of oxidant for 60ml of dye.
Apply the mixture to all of your dry and unwashed hair or locally.
Leave on for 20-40 minutes under heat! You can start washing after the hair has cooled to room temperature.
Add some hot water to the dyed hair, lather it up and ensure that the dye is spread evenly throughout your hair.
Wash by massaging with plenty of warm water for 3-5 minutes until clean water flows.
Wash and rinse your hair with a shampoo suitable for your hair type.
The waiting time can be increased or decreased in a controlled manner depending on your hair type and desired effect.
