Organic hair dye organic hair dye minimizes the damage caused by dye to the hair with its ammonia and resorcinol-free structure.
Enriched with almond and fruit extracts to protect the hair structure.
Supported with vitamins E and C for more permanent color results.
Creates hair colors with natural brightness.
It offers creative and permanent alternatives with its wide color range.
In addition to perfect white coverage, it provides color lightening up to 4 tones.
The information leaflet that comes inside the box should be taken into consideration when mixing and applying paint.
The mixing amount and application methods written on the site are recommendations.
The mixing ratio, application method and waiting time may change depending on the application and the paint to be used.
Oxidant selection oxidant is a creamy liquid that activates the paint.
One of the most important elements of hair coloring is choosing the right oxidant.
Choosing an oxidant that is not suitable for the procedure you will be performing may lead to undesirable results.
For this reason, you should choose your oxidant as carefully and meticulously as you choose your dye.
Be sure to use the same brand of oxidant as the dye you choose.
You can easily choose the oxidant that is suitable for the procedure you will be performing from the table below.
Oxidant: For covering white, lightening 1-2 tones and dyeing the hair the same tone, 30 vol oxidant: For lightening the hair up to 2-3 tones, 40 vol.
Oxidant: Should be preferred for lightening the hair 3-4 tones and for highlights and balayage applications.
Use a non-metallic mixing bowl and mixer to prepare the mixing mixture.
Select the appropriate oxidant for the process you will apply.
Use the same ratio of oxidant for 1 tube of dye.
If you are going to use 60ml dye, you need to add 60ml oxidant.
Mix the dye and oxidant until you obtain a smooth texture.
Warnings The dye you have purchased is prepared for professional use.
There is only 1 tube of dye in the box.
You need to purchase the oxidant you need to prepare the mixture separately.
Professional dyes are designed only for dyeing hair.
Not suitable for different uses such as eyelashes, eyebrows, beards, mustaches.
Prefer non-metallic products to prepare and apply the mixture.
Do not use metal accessories (clips, hairpins, pliers, combs, etc.) during dyeing.
Apply all dyeing processes to unwashed, dry hair.
Use disposable protective gloves and a protective apron to prevent the dye from spreading throughout the application.
Do not exceed the recommended waiting time.
Hair color is directly affected by the time the dye stays on the hair.
Dyes that remain on the hair for less than necessary will not give the desired results, and dyes that remain on the hair for more than necessary will also have negative results.
Hair dyes can rarely cause allergic reactions.
To prevent such situations, be sure to do a sensitivity test.
Apply the small amount of mixture you will prepare to the area behind the ear or inside the elbow after cleaning and drying it.
If an allergic reaction is observed, never apply the dye.
Do not apply on sensitive and irritated scalps or on scalps damaged as a result of pathological conditions (eczema, psoriasis, etc.).
Application Root dyeing white coverage For more than 70 white hair, support from the main color is required in addition to the color you have chosen.
The main color and the selected color are added to the mixture in the same ratio.
Mix 30ml of main color and 30ml of selected color with a total of 60ml of oxidant.
Apply the mixture evenly to the roots of unwashed, dry hair.
Wait for 20-30 minutes at 40-50 degrees.
After the hair cools to room temperature, you can start washing.
Add some hot water to the dyed hair, lather it up and ensure that the dye spreads evenly throughout the hair.
Massage especially the white parts for 3-5 minutes.
Wash and rinse the hair with a shampoo suitable for your hair type.
The waiting time can be increased or decreased in a controlled manner according to the hair type and the desired effect.
Dyeing and changing natural hair, apply to all hair, leaving a 2 cm distance from the roots of unwashed and dry hair.
Apply to the roots of the hair after the dyeing process of all hair is completed.
Leave under heat for 15-20 minutes! After the hair cools down to room temperature, the washing process can be started.
Add some hot water to the dyed hair and lather it and ensure that the dye is evenly spread over all hair.
Wash with plenty of warm water by massaging for 3-5 minutes until the water runs clear.
Wash and rinse the hair with a shampoo suitable for your hair type.
The waiting time can be increased or decreased in a controlled manner according to the hair type and the desired effect.
Number 11 dyes, which provide up to 4 tones of color lightening, are mixed with oxidant at a ratio of 1 to 2.
You need to mix 120ml of oxidant for 60ml of dye.
Apply the mixture to all or locally on dry and unwashed hair.
Wait for 20-40 minutes under controlled heat! After the hair cools to room temperature, you can start washing.
Add some hot water to the dyed hair and lather it up and ensure that the dye spreads evenly throughout the hair.
Wash by massaging with plenty of warm water for 3-5 minutes until the water runs clear.
Wash and rinse the hair with a shampoo suitable for your hair type.
Waiting time can be increased or decreased in a controlled manner depending on the hair type and desired effect.
