Air Compressor
Model: BT-16
Voltage : 12 volt DC
Adapter: International convertor,100v -240v included
Plugs : US available
Sound : Quiet, vibration free
Holder : Airbrush holder, soft plastic
Port : Easy push-over & pull-off air hose connection
Air hose: 1.5m Air flow: 7.5L/min
Max pressure:25PSI
Time:  Designed for extended running and use
N.W./G.W.: 0.578kg/0.804kg

Suitable for 0.2~0.5mm airbrush ,especially perfect for makeup, cosmetic ,nail painting .
 Please contact [email protected] if you met any problem while using



 

Compressor Troubleshooting

Please find the picture showed on the right.

Do press the plug to make sure that plugin is fully inserted into the slot.

Troubleshooting Problems and Solutions

Holding airbrush too close to the face – Stay 6 to 8 inches away from your face to prevent the makeup from being caked on or blotchy.

Allowing too much makeup to flow by pulling trigger too far back – Only pull the trigger about 1/3 to 1/2 way back for a very light feathered and soft spray. Pulling the trigger past the midpoint can result in a heavy, blotchy or uneven coverage.

Makeup too thick – Use fresh makeup from a thoroughly shaken bottle, possibly have applied too much makeup.

Stopping the airbrush movement before shutting off makeup flow - Follow through with your airbrush stroke until after the trigger is released to shutoff makeup flow.

Allowing the needle to snap back into the tip – Always release the trigger gently to avoid splattering