Powerstep mens Archmolds Orthotic Insoles Heat Moldable Shoe Inserts for Maximum Cushioning and Full Support Physical Therapy Equipment At Blue Men s 13-13.5 US

Name: Powerstep Men's Archmolds Orthotic Insoles - Heat Moldable Shoe Inserts for Maximum Cushioning and Support - Blue - Size 13-13.5 US
Brand: Powerstep
SKU: US-BT-PC-AM-B001UFYM9O
Price: 104.99 USD
Availability: InStock

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

Powerstep mens Archmolds Orthotic Insoles Heat Moldable Shoe Inserts for Maximum Cushioning and Full Support Physical Therapy Equipment At Blue Men s 13-13.5 US

Regular Price: US$129.99

Special Price US$104.99

Availability: In stock

Supplier: Powerstep

Category: Health & Household Foot Health Inserts & Insoles Insoles

Qty:

Or checkout instantly with:

PowerStep Heat Moldable shoe insoles were designed to provide a personalized fit for all arch types through heat-molding technology.

PowerStep Heat Moldable shoe insoles are a trusted solution to improve foot function, decrease arch pain, and help alleviate common foot conditions typically caused by overpronation, mild to moderate pronation, or supination.

Heat Molding Instructions:

Prepare Shoe & Insole for Molding:

Preheat oven to 225° F. Loosen shoes and remove all padding and factory inserts. Test fit the insole in the shoe to insure correct size. Insole can be trimmed for a better fit, using the shoe's original insole as a guide.

Heat Insole for Molding:

Heat one insole at a time. Place insole on middle rack with the fabric side face up and the black temperature tab facing out. After 1 minute & 30 seconds, carefully remove the insole and check the temperature tab. Insole will be warm to the touch. If the black temperature tab hasn't turned red after 1 minute & 30 seconds, leave insole in oven for an additional 15 seconds until the temperature tab turns red - may take up to 5 minutes. Do not overheat.

Mold Insole:

Quickly place the insole into the loosened shoe. While wearing socks, place foot in shoe and stand with knees slightly bent, for 1 minute to set. Insoles can be remolded up to 5 times.

PowerStep ComfortLast

Heat Moldable insoles are intended for footwear where the factory insoles can be removed

Designed for shoes such as;

Athletic (Walking/Running)
Work
Casual Dress Shoes

Proper care:

Spot clean with mild detergent. Do not immerse in water. Air dry.

Customized Arch Support

PowerStep Heat Moldable shoe insoles were designed to provide a personalized fit for all arch types through heat-molding technology.

Why Heat Moldables

The PowerStep Heat Moldable full length insoles have a unique design with two layers of plush cushioning and a heat moldable base, allowing for maximum comfort with a personalized fit. The anatomical contoured arch support and heel cradle stabilize the foot and improve alignment, adding stability and motion control to limit excess stress on feet, ankles, joints, and tendons.


Happy Feet. Happy Back Verified Purchase \| 3.12.2023 I work at a hotel.. Get over 14000 steps a day, 5 days a week.. we happen to have a podiatrist staying at the hotel. Apparently he saw me walking. Introduced himself and asked me a couple questions. I told him I thought I needed to go to the good feet store. He told me to order these.! Best decision I've ever made. True to size quick and easy heated oven to 225. Only took a couple minutes in certain shoes put my foot in and that's the end of the story. I cannot believe how much pain I'm not in anymore. Thank you great product!!!	Work Very Well Verified Purchase \| 10.13.2022 I just finished heating and wearing these and I'm pleased with the result. I have a pair of Red Wing moldable arch supports in another pair of shoes, but the Red Wing are hard to find - maybe they don't make them anymore. The Red Wing were difficult to mold. The heat was too high, and they had a tendency to curl in the oven. These were very easy to mold, and it worked very well. I have high arches, and these are providing the support I need. I highly recommend. Note: One took a minute and 45 seconds at 250 degrees and the other took two minutes and 15 seconds. I guess they're variable.	These heat moldable custom orthotics work fabulously.. Verified Purchase \| 8.20.2022 First off, my review is not influenced by the seller. This is my second review of the Power Step custom orthotics. I purchased the thin version initially and I was so impressed I ordered these thicker version as I have many different types of shoes. Long story short-both work almost perfectly for me. I use the thin version for dressier casual shoes and thick version for sports & hiking. Thick orthotics by design doesn't always fit as it can be too thick. So buy thick and thin versions and you should be covered. I m so happy as these orthotics have surpassed my expectations. I spent 80 for two pairs and that translates to a savings of approximately 400 to 700 compared to podiatrist orthotics. The size runs true also. Enjoy….	Solved my serious foot pain Verified Purchase \| 4.11.2021 I tried numerous insoles and one that was supposed to stop Morton's neuroma and pronation damaged my feet. For 2 months I was hobbling after sports and in pain all of the time, felt like a fracture plus tendonitis. I tried other inserts like Dr S gel but they have no arch support. A friend had gone to Goodfeet and spent 1000 for his problem and I was considering that also. The Powerstep inserts have eliminated my foot pain. It took several weeks but I felt slight improvement immediately. I did do the baking process twice and put a piece of foam under the arch. I have bought several more pairs for all my shoes.

The PowerStep® Heat Moldable shoe insoles were designed to provide a personalized, custom fit for all arch types through heat-molding technology. The PowerStep Heat Moldable full length insoles have a unique design with two layers of plush cushioning and a heat moldable base, allowing for maximum comfort with a customized fit. The anatomical contoured arch support and heel cradle stabilize the foot and improve alignment, adding stability and motion control to limit excess stress on feet, ankles, joints, and tendons. The Heat Moldable insoles provide the perfect blend of stability and cushioning for any arch type.

HOW TO GET A CUSTOMIZED FIT: 1. Loosen shoes and remove all padding/factory insoles. 2. Preheat your oven to 225° F. 3. Bake one insole at a time until the white heat sensitive paper tab on the bottom of the insole turns black (approximately 1 min 30 sec). DO NOT OVERHEAT Quickly remove insole from oven and place into shoe. While wearing socks, insert foot into shoe. Stand on insole with knees slightly bent for 1 min. DESIGNED FOR EVERYDAY USE: PowerStep Heat Moldable insoles are made to fit sized, meaning no trimming, you order your shoe size. Inserts are movable from shoe to shoe if necessary and are intended for footwear where the factory insoles can be removed. First time PowerStep or orthotic insert users may need a transition period of wearing insoles only a few hours a day until feet are accustomed to all day support and stability. CUSTOM ARCH SUPPORT | MAXIMUM CUSHIONING | MAXIMUM SUPPORT: The PowerStep Heat Moldable full-length insole provides the perfect blend of stability and cushioning with two layers of plush cushioning and heat moldable base, allowing for maximum comfort with a customized fit. The anatomical arch support and heel cradle stabilize the foot and improve alignment which adds stability and motion control to limit excess stress on the feet, ankles joints and tendons. FOOT PAIN PREVENTION AND RELIEF: PowerStep Heat Moldable insoles are ideal for pain associated with Plantar Fasciitis, Morton's Neuroma, Achilles Tendonitis, shin splints and other foot conditions caused by overpronation, ankle, knee, hip & back pain. As the #1 Podiatrist recommended brand, our mission and purpose at PowerStep is to create a more comfortable and happier life for our customers. ~ The PowerStep Pain Free Life. DESIGNED SPECIFICALLY TO BE CUSTOMIZED TO YOUR FOOT: The PowerStep Heat Moldable insole has a unique design which includes a heat moldable base, allowing for a customized fit that you can do at home. Manmade sole. 100% Polyester.

Best Sellers Rank: See Top 100 in Health & Household. Recommended Uses For Product: Shoe. Material: Polyester, Ethylene Vinyl Acetate, Polyurethane Foam. Use for: Foot. Color: Blue. Brand: Powerstep. International Shipping: This item can be shipped to select countries outside of the U.S. Domestic Shipping: Item can be shipped within U.S. Country of Origin: Korea, Republic of. : B001UFYM9O. Manufacturer: Powerstep. Date First Available: December 21, 2002. Department: unisex-adult. Item model number: 5315-01K. Product Dimensions: 13.4 x 4.5 x 1.9 inches; 3.2 Ounces. Is Discontinued By Manufacturer: No.