Wella illumina 10 1 lightest ash brown hair dye features 3D technology adds dimension and depth to hair creates bright, vivid and eye-catching colors allows you to create the extraordinary colors you dream of preserves its color and brightness for a long time thanks to the color pigments that adhere perfectly to the hair surface the leaflet that comes with the box should be taken into consideration in dye mixtures and applications the amount of mixture and application methods written on the site are recommendations the mixing ratio, application method and waiting time may change according to the application to be made and the dye to be used oxidant selection oxidant is a creamy liquid that activates the dye one of the most important elements of hair dyeing is to choose the right oxidant. An oxidant that is not suitable for the process you will perform may cause undesirable results. For this reason, you should choose your oxidant as carefully and meticulously as your dye selection. Be sure to use the same brand of oxidant as the dye you choose. You can easily choose the oxidant that is suitable for the process you will apply from the table below. 20 vol.
Oxidant: For covering gray hair, lightening 1-2 tones and dyeing the hair to the same tone. 30 vol.
Oxidant: For lightening the hair up to 2-3 tones. 40 vol.
Oxidant: It should be preferred for lightening the hair by 3-4 tones and for highlighting and balayage applications. Use a non-metal mixing bowl and mixer to prepare the mixture. Choose the appropriate oxidant for the process you will apply. Mix 1 tube of dye with the same ratio of oxidant cream. Use 60ml oxidant for 60ml dye. Mix the dye and oxidant until you obtain a smooth texture. Apply the root dye mixture equally to the roots of unwashed, dry hair. Wait for 15-25 minutes under heat, or 30-40 minutes if it is to be kept at room temperature. At the end of the specified waiting time, rinse the hair with plenty of warm water until clean water flows. Wash and rinse with color protection shampoo. White coverage. If the main color tone is also added to the mixture for white coverage, mix the main color with the same ratio of the dye you have chosen, with the same ratio of oxidant. If you are mixing 60ml dye with 60ml main color, you should add a total of 120ml oxidant. Start applying the dye from the areas where white is intense, under heat. Leave it for 15-25 minutes, or 30-40 minutes if it will be left at room temperature, at the end of the specified waiting period, rinse the hair with plenty of warm water until clean water flows, then wash and rinse with color protection shampoo. Dyeing and changing natural hair. Apply the dye to the lengths and ends of unwashed and dry hair, leaving 3 cm from the roots. Leave it under heat for 10 minutes, or 20 minutes if it will be left at room temperature. At the end of the waiting period, apply the remaining dye to the roots. Leave it under heat for 15-25 minutes, or 30-40 minutes if it will be left at room temperature. After the waiting process is over, rinse the hair with plenty of warm water until clean water flows. Wash and rinse with color protection shampoo. Warnings: The dye you have purchased is prepared for professional use. There is only 1 tube of dye in the box. You need to purchase the oxidant you need to prepare the mixture separately. Professional dyes are designed only for dyeing hair.
It is not suitable for different uses such as eyelashes, eyebrows, beards, mustaches. Prefer non-metallic products to prepare and apply the mixture. Do not use metal accessories (clips, hairpins, pliers, combs, etc.) during dyeing. Apply all dyeing processes to unwashed, dry hair. Use disposable protective gloves during application and a protective apron to prevent the dye from spreading around. Do not exceed the recommended waiting time. Hair color is directly affected by the time the dye stays in the hair. Dyes that remain in the hair for less than necessary will not give the desired results, while dyes that remain in the hair for more than necessary will also have negative results. Hair dyes can rarely cause allergic reactions.
To prevent such situations, be sure to do a sensitivity test. Apply the small amount of the mixture you will prepare after cleaning and drying the area behind the ear or inside the elbow. Observe for 48 hours.
If an allergic reaction is observed, never apply the dye to sensitive and irritated scalps or to scalps damaged by pathological conditions (such as eczema, psoriasis)
