Wella Koleston Perfect Tube Hair Dye 55 0 Light Intense Brown 60 ml Features Adds dimension and depth to the hair with 3D technology Creates bright, vibrant and eye-catching colors Allows you to create the extraordinary colors you dream of It maintains its color and shine for a long time thanks to the color pigments that adhere perfectly to the hair surface. The package insert coming out of the box should be taken into consideration when mixing and applying dyes. The amount of mixture and application methods written on the site are recommendations. Mixture ratio according to the application to be made and the dye to be used, application method and waiting time may vary. Oxidant Selection Oxidant is a creamy liquid that activates the dye. One of the most important elements of hair dyeing is choosing the right oxidant. Choosing an oxidant that is not suitable for the process you will do may lead to undesirable results. For this reason, you should make your oxidant selection as carefully and carefully as your dye selection. Be careful to use the same brand of oxidant as the dye you choose. You can easily choose the oxidant that is suitable for the process you will apply from the table below. 20 Vol. Oxidant: 30 Vol for covering white, lightening 1-2 tones and dyeing the hair to the same tone. Oxidant: 40 Vol for lightening the hair up to 2-3 tones. Oxidant: It should be preferred for lightening the hair by 3-4 tones and for highlighting and balayage applications. Mixture. Use a non-metal mixing bowl and mixer to prepare the mixture. Choose the oxidant suitable for the process you will apply. Mix 1 tube of dye with oxidant cream at the same rate. Use 60ml of oxidant for 60ml of dye. Mix the dye and oxidant until you obtain a smooth texture. Application Dip Dyeing Apply the mixture equally to unwashed dry hair roots. Natural colors, extra Leave red, intense red and fashion tones under heat for 15-25 minutes, or at room temperature for 30-40 minutes. Leave special blonde tones under heat for 25-35 minutes, or at room temperature for 50-60 minutes. At the end of the specified waiting time, rinse the hair with warm and plenty of water until clear water flows. Wash and rinse with color protection shampoo. White Coverage Adding the main color tone into the mixture for white coverage. You need to mix the main color with the same amount of oxidant as the paint you have chosen. If you are mixing 60ml of main color with 60ml of paint, you should add 120ml of oxidant in total. Start applying the paint from the areas where white is intense. Natural colors, extra red, intense red and fashion tones should be kept under heat for 15-25 minutes, or 30-40 minutes if kept at room temperature. Special blonde tones should be kept under heat for 25-35 minutes, if kept at room temperature for 50-60 minutes. At the end of the specified waiting time, rinse the hair with warm and plenty of water until clean water flows. Then wash and rinse with color protection shampoo. Dyeing and Color Changing Natural Hair. Apply the dye to the lengths and ends, leaving 3cm from the roots, on unwashed and dry hair. Natural colors, extra red, intense red and fashion tones should be waited for 10 minutes under heat, 20 minutes at room temperature. Special blonde tones should be waited for 15 minutes under heat, at room temperature. Leave it for 30 minutes. At the end of the waiting period, apply the remaining dye to the roots. Natural colors, extra red, intense red and fashion tones wait 15-25 minutes under heat, 30-40 minutes at room temperature. Leave special blonde tones for 25-35 minutes under heat, or another 50-60 minutes at room temperature. After the waiting process is over, rinse the hair with warm and plenty of water until clear water flows. Use color protection shampoo. Wash and rinse. Warnings: The paint you purchased has been prepared for professional use. There is only 1 tube of paint in the box. You need to separately purchase the oxidant you need to prepare the mixture. Professional dyes are designed only for hair dyeing. They are not suitable for different uses such as eyelashes, eyebrows, beard, moustache. Choose non-metal products to prepare and apply the mixture. Do not use metal accessories (clips, buckles, forceps, combs, etc.) during dyeing. Apply all dyeing processes to unwashed, dry hair. Disposable protective gloves throughout the application and a protective apron to prevent the dye from spreading around. Do not exceed the recommended waiting time. Hair color is directly affected by the duration of the dye remaining on the hair. Dyes left on the hair for less than necessary will not give the desired results, and dyes left on the hair longer than necessary will also produce negative results. Hair dyes can rarely cause allergic reactions. To prevent such situations, be sure to perform a sensitivity test. Prepare a small amount of the mixture, apply it behind the ear or inside the elbow, after cleaning and drying it. Observe for 48 hours. If an allergic reaction is observed, never apply the dye. Do not apply it to sensitive and irritated scalp or damaged scalp as a result of pathological conditions (such as eczema, psoriasis).
