Wella Professionals Illumina 5 7 Light Brown Hair Dye 60 ml Features Adds dimension and depth to the hair with 3D technology Creates bright, vibrant and eye-catching colors Allows you to create the extraordinary colors you dream of It maintains its color and shine for a long time thanks to the color pigments that adhere perfectly to the hair surface. The package insert coming out of the box should be taken into consideration when mixing and applying the dye. The amount of mixture and application methods written on the site are recommendations. Mixing ratio and application method according to the application to be made and the dye to be used. and holding time may vary. Oxidant Selection Oxidant is the creamy liquid that activates the paint. One of the most important elements of hair dyeing is choosing the right oxidant. Choosing an oxidant that is not suitable for the process you will do may lead to undesirable results. For this reason, you should make your oxidant choice as carefully and carefully as your paint choice. Be careful to use the same brand of oxidant as the dye you choose. You can easily choose the oxidant that is suitable for the process you will apply from the table below. 20 Vol. Oxidant: 30 Vol for white coverage, 1-2 tone lightening and dyeing the hair to the same tone. Oxidant: 40 Vol. to lighten the hair up to 2-3 tones. Oxidant: It should be preferred for lightening the hair by 3-4 tones and for highlight and balayage applications. Mixture. Use a non-metal mixing bowl and mixer to prepare the mixture. Choose the oxidant suitable for the process you will apply. Mix 1 tube of dye with oxidant cream at the same rate. Use 60ml of oxidant for 60ml of dye. Mix the dye and oxidant until you obtain a smooth texture. Application Apply the mixture equally to unwashed dry hair roots. 15-25 minutes under heat. If waiting at room temperature, leave it for 30-40 minutes. At the end of the specified waiting time, rinse the hair with warm and plenty of water until clean water flows. Wash and rinse with color protection shampoo. White Coverage For white coverage, the main color tone must be added into the mixture. Mix the main color with the same amount of oxidant as the dye you have chosen. If you are mixing 60 ml of paint with 60 ml of the main color, you must add 120 ml of oxidant in total. Start applying the paint from the areas where white is dense. Leave it under heat for 15-25 minutes, or at room temperature for 30-40 minutes. At the end of the specified waiting time, rinse your hair with warm and plenty of water until clean water flows. RinseThen wash and rinse with color protection shampoo. Dyeing and Color Changing Natural Hair. Apply the dye to the lengths and ends, leaving 3cm from the roots, on unwashed and dry hair. Leave it for 10 minutes under heat, or 20 minutes if it will be kept at room temperature. At the end of the waiting period, apply the remaining dye to the roots. Leave it for 15-25 minutes under heat, or another 30-40 minutes if it will be kept at room temperature. After the waiting process is over, rinse with clean water. Rinse your hair with plenty of warm water until it runs clear. Wash and rinse with color protection shampoo. Warnings: The dye you purchased has been prepared for professional use. There is only 1 tube of dye in the box. You need to separately purchase the oxidant you need to prepare the mixture. Professional dyes are designed only for hair dyeing. They are not suitable for different uses such as eyelashes, eyebrows, beard, moustache. Choose non-metal products to prepare and apply the mixture. Do not use metal accessories (clips, buckles, forceps, combs, etc.) during dyeing. Apply all dyeing processes to unwashed, dry hair. Disposable protective gloves throughout the application and a protective apron to prevent the dye from spreading around. Do not exceed the recommended waiting time. Hair color is directly affected by the length of time the dye stays on the hair. Dyes left on the hair for less than necessary will not give the desired results, and dyes left on the hair longer than necessary will still produce negative results. Hair dyes may rarely cause allergic reactions. To prevent such situations, be sure to perform a sensitivity test. Apply the small amount of mixture you will prepare after cleaning and drying the area behind the ear or inside the elbow. Observe for 48 hours. If an allergic reaction is observed, never apply the dye. Do not apply it to sensitive and irritated scalp or damaged scalp as a result of pathological conditions (such as eczema, psoriasis).
