Common Reasons Why Customers Say It Can'T Be Cured
1. i0d0 Uv Resin Light Curing For Epoxy Large Can Only Be Used To Cure Uv Glue And Uv Resin. It Must Be Ensured That The Material Used Is Uv Material. Generally, An Opaque Black Bottle Is Used. If The Glue Bottle You Use Is Not Black, Then It May Not Be A Uv Type, And This Lamp Is Not Suitable For Use.
2. The Curing Time In The Introduction Refers To The Time Used For The Area That Uv Resin Curing Light Can Cover, And The Thickness Does Not Exceed 6mm; If The Thickness Exceeds 6mm, Double-Sided Lighting Is Required Or The Area To Be Cured Is Larger Than The Lighting Area, Then More Much Time.
For Example 1: The Resin Area To Be Cured: 1in In Diameter, 5mm In Thickness, Using Uv Curing Light With A Single Irradiation Area Of 2in, It Only Takes 30 Seconds To 2 Minutes To Cure, Just Once.
For Example 2: The Resin Area That Needs To Be Cured: 8in In Diameter, 8mm In Thickness, Using Uv Curing Lamp With A Single Irradiation Area Of 2in, One Side Needs 8in/2in=4 Times, If The Thickness Is Too Thick, It Needs To Be Irradiated On Both Sides, That Is 4*2=8 Times . Takes 8 Times As Long,
But If You Buy A Uv Resin Lamp With A Diameter Of 10 Inches In A Single Irradiation Area, You Only Need To Irradiate One Side Once, And If The Thickness Exceeds 6mm, You Need To Irradiate On Both Sides, Which Takes Twice The Time.
Please Choose UV Curing Lamps With Different Sizes Of Irradiation Areas According To Your Own Needs.
If You Have Any Questions In Use, Please Use The Questions And Answers On The Amazon Details Page, Ask, And We Will Answer For You.